Where To Place Carbon Monoxide Detectors In Your Salt Lake City Residence
Homeowners must safeguard against a variety of risks like burglary, flooding, and fire. But what about a risk that can’t be discerned by human senses? Carbon monoxide is different from other threats as you may never know it’s there. Despite that, using CO detectors can simply shield you and your household. Explore more about this hazardous gas and where to place carbon monoxide detectors in your Salt Lake City residence.
What Is Carbon Monoxide?
Referred to as the silent killer because of its absence of color, taste, or odor, carbon monoxide is a commonly found gas produced by an incomplete combustion of fuels. Any fuel-burning appliance like an oven or fireplace may generate carbon monoxide. Even though you usually won’t have any trouble, difficulties can crop up when an appliance is not frequently inspected or adequately vented. These oversights may lead to an accumulation of the potentially lethal gas in your residence. Heating appliances and generators are the most common causes for CO poisoning.
When exposed to minute amounts of CO, you might notice fatigue, headaches, dizziness nausea, or vomiting. Prolonged exposure to high levels could cause cardiorespiratory failure, and even death.
Recommendations On Where To Place Salt Lake City Carbon Monoxide Detectors
If your home doesn’t have a carbon monoxide detector, get one now. Ideally, you should use one on each floor, including basements. Explore these suggestions on where to place carbon monoxide detectors in Salt Lake City:
- Install them on every level, specifically in places where you have fuel-burning appliances, such as fireplaces, furnaces, water heaters, and gas dryers.
- You should always have one within 10 feet of bedroom areas. If you only have one carbon monoxide detector, this is where to put it.
- install them at least 10 to 20 feet away from sources of CO.
- Avoid placing them directly beside or above fuel-consuming appliances, as a small amount of carbon monoxide could be discharged when they kick on and trigger a false alarm.
- Fasten them to walls approximately five feet from the floor so they can sample air where inhabitants are breathing it.
- Avoid installing them beside doors or windows and in dead-air places.
- Place one in spaces above attached garages.
Test your CO detectors regularly and maintain them according to manufacturer instructions. You will usually need to replace units within five or six years. You should also make sure any fuel-utilizing appliances are in in optimal working condition and sufficiently vented.